Do you have an old or damaged skylight? We can safely replace your skylight with protection for your home throughout the processs to help bring back more natural light into your living space.
Do you have an old or damaged skylight?
We safely replace the skylights in your home with future damage prevention.
VELUX® skylights and Sun Tunnel® skylights can be installed in flat or vaulted ceilings in two worry-free phases: rooftop and interior. We can recommend where skylights should be installed, so you can reap the maximum benefit from the natural light and fresh air they provide.
Skylight Installation
1. Rooftop Installation
Installers will cut a hole and fasten the VELUX skylight to the roof with Three layers of protection to prevent leaks. Depending on the circumstances such as roof pitch and weather, the rooftop phase can take between one and three days.
2. Interior Installation
Installers will come inside for interior finish work and possible painting. If you have a flat ceiling, your installer will use drywall or other finish material to build a shaft from the skylight to direct the daylight into the room. This phase takes around half a day per skylight.
3. Beautifully Transformed
Installers may paint the light shaft to match the surrounding ceiling. The complete installation process will be mess- and worry-free.
Sun Tunnel Skylight Installation
1. Rooftop Installation
Installers will cut a hole in the roof and install the top collar, the upper portion of the reflective tunnel, the lens and the flashing.
2. Interior Installation
Installers will cut a hole in the ceiling to install the lower portion of the reflective tube between the roof and ceiling.
3. Beautifully Transformed
Then, they will install the diffuser and trim ring and seal the tube. The complete installation process will be mess- and worry-free.